Stiebel Eltron DHC Series
Point-of-Use Tankless Water Heater

Stiebel Eltron
DHC Series Advantages:

• save space
• save energy
• reduce water waste
• simple installation
• very economical
• legendary Stiebel quality

---

Stiebel Eltron DHC Series Tankless Brochure
Adobe PDF Format

---

Stiebel Eltron DHC Series Tankless Installation Guide
Adobe PDF Format

---

the Stiebel Eltron DHC Series
tankless water heaters are independently tested to comply with US and Canadian safety standards

---

Stiebel Eltron Tankless Water Heaters are tested and certified by WQA against NSF/ANSI 372 for "lead free" compliance.

---

Stiebel Eltron is

Quality you can count on!
Manufactured in Germany

The Stiebel Eltron DHC series tankless water heaters are well built, economical, and ultra-compact point-of-use tankless water heaters designed for basic point of use applications. Basic point of use applications include many bathroom sinks, kitchens, commercial washrooms, emergency eyewash stations, etc. The DHC series is designed for applications with a relatively constant flow rate. If the flow rate will potentially fluctuate in your application due to varying water demands, incoming water temperatures, or water pressures, we recommend that you consider a DHC-E Series tankless water heater with thermostatic control and flow-based power modulation technology.

The Stiebel Eltron DHC Series can conveniently fit directly under a sink or in an adjacent cupboard or closet, so they deliver hot water to the application almost instantly. By locating the heater right next to the faucet, you can also virtually eliminate the thermal heat loss which is commonly associated with long pipe runs. If the DHC Series heater can supply all of the hot water needs for the room, you may also be able to eliminate the need to run a hot water line all the way from the main central water heater. This can result in significant savings in plumbing and material costs.

The DHC Series are extremely energy efficient, as they produce hot water on demand only as it is being called for. A sophisticated water flow sensor recognizes when hot water is turned on and when it has been turned off, so the unit will activate and deactivate automatically so it only runs when you are actually using hot water. The standby thermal heat losses associated with traditional tank type water heaters are therefore eliminated. You can expect to see a significant reduction in cost over operating a conventional water heater.

An exclusive scald-guard thermostat keeps the water temperature within safe limits at all times. Additionally, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The Stiebel Eltron DHC Series is not recommended for whole house use. For more information on whole house models, see our Stiebel Eltron Tempra Series Whole House Tankless Water Heaters.

* Breaker size and wire gauge must meet all applicable local, state, provincial, and national electrical codes for your area - these are only guidelines that will apply to most installations. Please consult your electrician for more details.

Stiebel Eltron DHC Series Point-of-Use Tankless Water Heater Models & Specifications
	DHC 3-1 Classic	DHC 3-2 Classic	DHC 4-2 Classic	DHC 4-3 Classic	DHC 5-2 Classic	DHC 6-2 Classic	DHC 8-2 Classic	DHC 10-2 Classic
KW	3.0 KW @ 120V	3.3 KW @ 240V (2.5 KW @208V)	3.8 KW @ 240V (2.9 KW @208V)	4.5 KW @ 277V	4.8 KW @ 240V (3.6 KW @208V)	6.0 KW @ 240V (4.5 KW @208V)	7.2 KW @ 240V (5.4 KW @208V)	9.6 KW @ 240V (7.2 KW @208V)
Voltage:	110-120 volts single phase 50 - 60 Hz	208-240 volts single phase 50 - 60 Hz	208-240 volts single phase 50 - 60 Hz	277 volts single phase 50 - 60 Hz	208-240 volts single phase 50 - 60 Hz	208-240 volts single phase 50 - 60 Hz	208-240 volts single phase 50 - 60 Hz	208-240 volts single phase 50 - 60 Hz
Max. Amps:	25 AMPS @ 120V	14 AMPS @ 240V (12 AMPS @208V)	16 AMPS @ 240V (14 AMPS @208V)	17 AMPS @ 277V	20 AMPS @ 240V (18 AMPS @208V)	25 AMPS @ 240V (22 AMPS @208V)	30 AMPS @ 240V (26 AMPS @208V)	40 AMPS @ 240V (35 AMPS @208V)
Breakers Required:*	25 AMP @ 120V	15 AMPS @ 240V (15 AMPS @208V)	20 AMPS @ 240V (15 AMPS @208V)	20 AMPS @ 277V	20 AMPS @ 240V (20 AMPS @208V)	25 AMPS @ 240V (25 AMPS @208V)	30 AMPS @ 240V (30 AMPS @208V)	40 AMPS @ 240V (35 AMPS @208V)
Wiring:*	Min. #10 AWG Copper	Min. #14 AWG Copper	Min. #12 AWG Copper	Min. #12 AWG Copper	Min. #10 AWG Copper	Min. #10 AWG Copper	Min. #10 AWG Copper	Min. #8 AWG Copper
Dimensions:	14.25 x 7.9 x 4.1" (36 x 20 x 11 cm)
Weight:	4.6 lbs (2.1 KG)	5.3 lbs (2.4 KG)	5.3 lbs (2.4 KG)	4.6 lbs (2.1 KG)	4.6 lbs (2.1 KG)	4.6 lbs (2.1 KG)	5.3 lbs (2.4 KG)	5.3 lbs (2.4 KG)
Activation Flow Rate:	0.32 GPM (1.2 LPM)	0.32 GPM (1.2 LPM)	0.42 GPM (1.6 LPM)	0.42 GPM (1.6 LPM)	0.42 GPM (1.6 LPM)	0.47 GPM (1.8 LPM)	0.69 GPM (2.6 LPM)	0.79 GPM (3.0 LPM)
Energy Efficiency:	99%+
Pipe Fittings:	1/2" NPT
Max. Water Pressure:	150 psi
Warranty:	Manufacturer's 3 Year Warranty
Safety:	ETL Listed (US / Canada) - Independently tested to meet U.S. and Canadian safety standards
Protection:	scald guard thermostat and thermal hi-limit cut-out switch
Price Lowest Price Guaranteed!	US$199.00 + Free Shipping	US$199.00 + Free Shipping	US$199.00 + Free Shipping	US$199.00 + Free Shipping	US$199.00 + Free Shipping	US$199.00 + Free Shipping	US$199.00 + Free Shipping	US$199.00 + Free Shipping
	DHC-3-1	DHC-3-2	DHC-4-2	DHC-4-3	DHC-5-2	DHC-6-2	DHC-8-2	DHC-10-2