Stiebel Eltron Accelera 220 E Heat Pump Water Heater

one of the world's most efficient heat pump water heaters!

Let us help you evaluate if a heat pump water heater is right for your application. Call us now...

---

Stiebel Eltron
Accelera 220 E Brochure
Adobe PDF Format

---

Stiebel Eltron
Accelera 220 E Installation Guide and Owner's Manual
Adobe PDF Format

---

the Stiebel Eltron Accelera 220 E heat pump water heater is independently tested to comply with both US and Canadian safety standards

---

Stiebel Eltron is

Quality you can count on!
Manufactured in Slovakia

Write a review.

Stiebel Eltron Accelera 220 E
List Price: US$2,999.00 Our Price: US$2,499.00 You save: $500.00 Found a Lower Price? Request a Price Beat

Building on their success with the Accelera 300, Stiebel Eltron's Accelera 220 E has an even higher Energy Factor. The Energy Factor is the ratio of useful energy output from the water heater to the total amount of energy delivered to the water heater and it is measured in accordance with strict standards so consumers can compare the efficiencies of one model to another. The Stiebel Eltron Accelera 220 E boasts an Energy Factor of 3.05. The Accelera 220 E features an electronic display which provides each access to a wide variety of useful information, including total volume of hot water available. It has been fully redesigned from the ground up with a removable top for easy access servicing, and improved air intake and exhaust to allow for installation in compact spaces.

• reduce water heating cost by up to 80%
• electronic display
• 58 gallon storage capacity
• back-up booster element
• cools and dehumidifies air around it
• low heat loss through superior insulation
• impressed current maintenance free anode
• meets all U.S. & Canadian safety standards
• 10-year warranty

Heat pump water heaters are the latest water heating technology to emerge in the North American market. While heat pumps have been efficiently heating the air in our homes for decades, it is only recently that the same technology has been integrated into relative compact and highly efficient water heating systems for both residential and light commercial applications. The efficiency of a heat pump water heater typically exceeds 200%! Accordingly, they cost less than half as much to operate as a conventional tank-type water heater.

A heat pump does not generate heat like a conventional water heater. Rather, it "pumps" or transfers heat from one area to another by alternatively compressing and decompressing a refrigerant as it passes from one area to another. In the case of a heat pump water heater, it transfers heat from the air surrounding the heater into the water inside its tank. Since only a small compressor motor, pump, and fan are required, the process is extremely energy efficient!

The Accelera series heat pump water heaters feature an enamel-lined storage tank with a very high level of foam insulation for low stand-by heat loss. A back-up electric heating element is integrated into the unit to deliver extra heating power in the event that the heat pump is unable to draw sufficient heat from the air surrounding the unit to meet short-term peak water demands.

* Breaker size and wire gauge must meet all applicable local, state, provincial, and national electrical codes for your area - these are only guidelines that will apply to most installations. Please consult your electrician for more details.

Important Heat Pump Installation Considerations:

The Accelera 220 E and other heat pump water heaters should not be installed in a location where the ambiant air temperature regularly drops below 42F (6C) or exceeds 108F (42C). Since the Accelera takes heat from the air around it, it is most desirable to install it in an area with excess heat such as a garage or attic in warm climate areas. In colder climates, the Accelera can be installed in a basement where it will help dehumidify the air. It is important to ensure that there is a sufficient volume of air around the unit for effective heat extraction and optimal efficiency. There should be approximately 800 cubic feet air in the installation room unless ducting is provided to bring in more air from another room or location and to exhaust the cool air from the outlet of the heat exchanger. Install in a location where there is a 2' gap between the air intake and any wall, and a 6' gap between the air exhaust and any wall.. When installing the water heater inside, the space where it is installed will generally be cooled down during the operation by 2 to 6F (1 to 3C). Please see the Installation manual for important recommendations regarding physical clearance recommendations.

To prevent nuisance from operating noise, never install the water heater in the vicinity of bedrooms. The compressor motor and fan make about as much noise as a refrigerator or small room air conditioner when running.

E-Tankless Water Heaters is one of only two dealers directly authorized by Stiebel Eltron to distribute the Accelera 220 E heat pump water heater online. You can be assured that you will not only receive the highest level of pre and post-purchase customer service, including advice with respect to your application, but you will also be backed by a fully valid manufacturer's 10 year warranty if you decide to purchase. Please feel free to contact us toll free at 1-877-374-2696 to speak directly to one of our staff regarding your application.

Please Note: Please review our store policies, particularly the return policy as it relates to the Accelera Series, before ordering.