ecoTAC P4R Replacement Filter
replacement filter cartridge for ecoTAC Protector 4 hard water conditioner for tankless water heaters (4 GPM)
ecoTAC P4R Replacement Hard Water Conditioner Filter Cartridge | List Price: CDN$ Our Price: CDN$189.95 You save: $45.05 Found a Lower Price? Request a Price Beat |
|
This replacement cartridge is designed specifically for the ecoTAC Protector 4 hard water conditioner for tankless water heaters.
It can also be used to downgrade the ecoTAC Protector 6 to an ecoTAC Protector 4.
Additionally, this cartridge will fit most other brands of "Big Blue" 4.5 x 20 inch filter housings and many competitor's TAC filters of the same size, particularly the Takagi Product Preservers SM1.0L-RM.
- Protects the investment in your new water heater
- Ideal for all brands of tankless and tank-type water heaters
- Ensures optimal performance and efficiency
- Maintains water pressure and flow rates
- Prevents pre-mature heating element / heat exchanger failure
- Built-in sediment pre-filter
- No salt, no chemical regeneration, and no brine discharge!
- No backwash - save thousands of gallons of water per year compared to a traditional water softener
- When compared to polyphosphate (Siliphos) filters, it is more environmentally friendly and displays superior performance
- Does not add any chemicals to the water or change its taste, smell, or feel
ecoTAC Protector Series filters will provide benefits where the hardness of the water exceeds 7 grains per gallon or 120 ppm (mg/l), and is strongly recommended where the hardness exceeds 12 grains per gallon or 200 ppm (mg/l). Install on the cold water line prior to your tankless water heater.
| Learn More About Water Quality & Tankless Water Heaters: | |
|---|---|
| ecoTAC P4R Specifications: | |
|---|---|
| Media / Technology: | Template Assisted Crystallization Media (TAC) |
| Dimensions: | 4.5" diameter x 20" fits in most "Big Blue" 20" Filter Housings |
| Maximum Flow Rate: | 4 Gallons per Minute (GPM) 15 Litres per Minute (LPM) |
| Maximum Hardness: | 75 grains per gallon (GPG) / 1,280 ppm (mg/l) |
| Estimated Cartridge Life: | 2 years |
| For use with : | ecoTAC Protector 4 |
| Maximum Pressure: | 90 PSI |
| pH Range: | 6.5 to 8.5 |
| Pre-Treatment Conditions: |
Iron < 0.3 ppm (mg/l)
Manganese < 0.05 ppm (mg/l) Copper < 1.3 ppm (mg/l) Chlorine < 3 ppm (mg/l) - city water OK! Hydrogen Sulfide - none Polyphosphates & Oils - none |
ecoTAC P4R Replacement Hard Water Conditioner Filter Cartridge Reviews
Has saved our hot water heater!
After going through 3 on-demand hot water heaters in 5 years (due to hard water), we finally installed a e-tankless filter. It was easy to install (although plumbing tools are needed). Year three, and so far no more problems. The filter is worth the cost.
- Melanie
